![]() If the coolant level goes down, add coolant. (e) Check the coolant level inside the radiator by squeezing the inlet and outlet radiator hoses several times by hand. When replacing the coolant, Toyota Super Long Life Coolant (color is pink, premixed ethylene glycol concentration is approximately 50 % and freezing temperature is - 35☌ (-31☏)) is recommended.ĭo not substitute plain water for engine coolant. New Toyota vehicles are filled with Toyota Super Long Life Coolant.Use only Toyota Super Long Life Coolant or similar high quality ethylene glycol based nonsilicate, non-amine, non-nitrite, and on-borate coolant with long-life hybrid organic acid technology (coolant with long-life hybrid organic acid technology consists of a combination of low phosphates and organic acids.).Use of improper coolants may damage the engine cooling system.(d) Slowly fill the system with engine coolant. (g) Drain the coolant from the reservoir tank. (f) Remove the radiator cap and drain coolant. Top front of engine block drivers side of engine. (c) Install a vinyl hose onto the engine side. ![]() (b) Install a vinyl hose onto the radiator side. (a) Remove the 4 bolts, then remove the engine under cover No. Thermal expansion will cause hot engine coolant and steam to blow out from the radiator. To avoid the danger of being burned, do not remove the radiator cap while the engine and radiator are still hot. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |